DTC U0074:00 [PCM (SKYACTIV-G 2.0)]
| DTC U0074:00 |
CAN system communication error (local CAN between PCM and TCM) |
| DETECTION CONDITION |
|
| FAIL-SAFE FUNCTION |
Not applicable |
| POSSIBLE CAUSE |
|
Repeatability Verification Procedure
Clear the DTC from the PCM memory using the M-MDS. (See CLEARING DTC [PCM (SKYACTIV-G 2.0)].)
Start the engine.
Diagnostic Procedure
| STEP |
INSPECTION |
ACTION |
|
| 1 |
RECORD VEHICLE STATUS AT TIME OF DTC DETECTION TO UTILIZE WITH REPEATABILITY VERIFICATION NOTE:
|
— |
Go to the next step. |
| 2 |
VERIFY RELATED REPAIR INFORMATION AVAILABILITY
|
Yes |
Perform repair or diagnosis according to the available repair information.
|
| No |
Go to the next step. |
||
| 3 |
VERIFY RELATED PENDING CODE AND/OR DTC
|
Yes |
Go to the applicable PENDING CODE or DTC inspection. |
| No |
Go to the next step. |
||
| 4 |
CONFIRM TCM DTC
|
Yes |
DTC U0074:00 or U0115:00 is displayed:
DTC other than U0074:00 and U0115:00 is displayed:
|
| No |
TCM can be considered the cause.
|
||
| 5 |
VERIFY DTC TROUBLESHOOTING COMPLETED
|
Yes |
Replace the PCM, then go to the next step. |
| No |
Go to the next step. |
||
| 6 |
VERIFY AFTER REPAIR PROCEDURE
|
Yes |
Go to the applicable DTC inspection. |
| No |
DTC troubleshooting completed. |
||
