CHARCOAL CANISTER INSPECTION [SKYACTIV-G 2.0]
U.S.A. and CANADA Specs.
Leakage inspection
1. Perform the following procedures:
Do not operate CV solenoid valve.
Assemble the hose used for inspection to port A.
Cover ports B, C, and D with the caps.
CAUTION:
Do not apply a pressure 20 kPa {150 mmHg, 5.91 inHg} or more to the charcoal canister for 1 min. or more. Doing so will damage the charcoal canister.
2. Apply pressure ( 19.6 kPa {147 mmHg, 5.79 inHg}) through the hose, and verify that air does not leak from the charcoal canister.
If there is airflow, replace the charcoal canister. (See CHARCOAL CANISTER REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
If there is no airflow, perform the following “Airflow Inspection”. (See Airflow inspection.)
Airflow inspection
Between port A and port C
Perform the following procedure to verify the charcoal canister airflow.
Plug the port B and D.
Apply a pressure of 0.98 kPa {7.4 mmHg, 0.29 inHg} to port A.
Verify that there is airflow from port C.
If there is no airflow, replace the charcoal canister. (See CHARCOAL CANISTER REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
Between port B and port C
Perform the following procedure to verify the charcoal canister airflow.
Plug the port A and D.
Apply a pressure of 0.98 kPa {7.4 mmHg, 0.29 inHg} to port B.
Verify that there is airflow from port C.
If there is no airflow, replace the charcoal canister. (See CHARCOAL CANISTER REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
Except U.S.A. and CANADA Specs.
Leakage inspection
1. Perform the following procedures:
Assemble the hose used for inspection to port A.
Cover ports B and C with the caps.
CAUTION:
Do not apply a pressure 20 kPa {150 mmHg, 5.91 inHg} or more to the charcoal canister for 1 min. or more. Doing so will damage the charcoal canister.
2. Apply pressure ( 19.6 kPa {147 mmHg, 5.79 inHg}) through the hose, and verify that air does not leak from the charcoal canister.
If there is airflow, replace the charcoal canister. (See CHARCOAL CANISTER REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
If there is no airflow, perform the following “Airflow Inspection”. (See Airflow inspection.)
Airflow inspection
Between port A and port C
Perform the following procedure to verify the charcoal canister airflow.
Plug the port B.
Apply a pressure of 0.98 kPa {7.4 mmHg, 0.29 inHg} to port A.
Verify that there is airflow from port C.
If there is no airflow, replace the charcoal canister. (See CHARCOAL CANISTER REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)
< Previous Next >Between port B and port C
Perform the following procedure to verify the charcoal canister airflow.
Plug the port A.
Apply a pressure of 0.98 kPa {7.4 mmHg, 0.29 inHg} to port B.
Verify that there is airflow from port C.
If there is no airflow, replace the charcoal canister. (See CHARCOAL CANISTER REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)