System malfunction location

• C0061:29: Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)

• C0062:29: Low-G sensor (forward-G) in SAS control module (internal circuit disabled)

• C0063:29: Yaw rate sensor in SAS control module (internal circuit disabled)

Detection condition

WARNING:

• Detection conditions are for understanding the DTC outline before performing an inspection. Performing an inspection according to only the detection conditions may cause injury due to an operating error, or damage the system. When performing an inspection, always follow the inspection procedure.

• SAS control module internal sensor has a malfunction

Fail-safe function

Not applicable

Possible cause

SAS control module malfunction

System wiring diagram

Not applicable

STEP

INSPECTION

ACTION

1

• Clear the DTC for the SAS control module using the M-MDS.

  (See CLEARING DTC [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)

• Perform the DTC inspection for the SAS control module using the M-MDS.

  (See DTC INSPECTION [SAS CONTROL MODULE (STANDARD DEPLOYMENT CONTROL SYSTEM)].)

• Are the same DTCs present?

Yes

Replace the SAS control module.

(See SAS CONTROL MODULE REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM].)

No

DTC troubleshooting completed.