MX5 mk4 Manual
Home bodyshop manual wiring diagram workshop manual service highlights transmission overhaul

Knowledge Base

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5
Home

 

< Previous   Next >

NO NAVIGATION GUIDANCE VOICE OUTPUT [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]]

Description

NO NAVIGATION GUIDANCE VOICE OUTPUT

Radio, CD, AUX/USB audio, Bluetooth® audio, and Internet radio audio is output, but no navigation guidance audio

Possible Causes

  • SD card malfunction

  • Connector poor contact or terminal damage

  • Auxiliary jack/USB port/SD card slot hub malfunction

  • Global positioning system (GPS) antenna malfunction

  • CMU malfunction

Diagnostic Procedure

Step

Inspection

Action

1

    VERIFY VOLUME SETTING
  • Switch the ignition to ACC or ON (engine off or on).

  • Select the navigation mode by operating the commander switch or the center display.

  • Operate the navigation guidance audio by operating the commander switch or the steering switch.

  • Is navigation guidance audio output according to the operation?

Yes

System is normal.

No

Go to the next step.

2

    VISUALLY INSPECT SD CARD
  • Switch the ignition off.

  • Visually inspect the SD card for looseness or damage.

  • Is the SD card normal?

Yes

Go to the next step.

No

System is normal. (explain to the customer that there is a malfunction in SD card.)

3

    INSPECT GPS ANTENNA CONNECTOR
  • Disconnect the negative battery cable.

    (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

  • Disconnect the GPS antenna connector.

  • Inspect the connector engagement and connection condition and inspect the terminals for damage, deformation, corrosion, or disconnection.

  • Is the connector normal?

Yes

Go to the next step.

No

Repair or replace the connector, then go to Step 6.

4

    VERIFY IF MALFUNCTION CAUSE IS AUXILIARY JACK/USB PORT/SD CARD SLOT HUB
  • Replace the auxiliary jack/USB port/SD card slot hub.

    (See AUXILIARY JACK/USB PORT/SD CARD SLOT HUB REMOVAL/INSTALLATION.)

  • Connect all the connectors.

  • Reconnect the negative battery cable.

    (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

  • Insert the SD card when the malfunction occurred.

  • Switch the ignition to ACC or ON (engine off or on).

  • Select navigation by operating the center display or the commander switch.

  • Set to an optional destination and operate the navigation function.

  • Is navigation guidance audio output according to the operation?

Yes

Troubleshooting completed. (Explain the contents of the servicing to the customer.)

No

Go to the next step.

5

    VERIFY IF MALFUNCTION CAUSE IS GPS ANTENNA
  • Switch the ignition off.

  • Disconnect the negative battery cable.

    (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

  • Replace the GPS antenna.

    (See GLOBAL POSITIONING SYSTEM (GPS) ANTENNA REMOVAL/INSTALLATION.)

  • Connect all the connectors.

  • Reconnect the negative battery cable.

    (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

  • Insert the SD card when the malfunction occurred.

  • Switch the ignition to ACC or ON (engine off or on).

  • Select navigation by operating the center display or the commander switch.

  • Set to an optional destination and operate the navigation function.

  • Is navigation guidance audio output according to the operation?

Yes

Troubleshooting completed. (Explain the contents of the servicing to the customer.)

No

Replace the CMU, then go to the next step.

(See CONNECTIVITY MASTER UNIT (CMU) REMOVAL/INSTALLATION.)

6

    VERIFY IF MALFUNCTION CAUSE IS CORRECTED
  • Switch the ignition off.

  • Disconnect the negative battery cable.

    (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

  • Connect all the connectors.

  • Reconnect the negative battery cable.

    (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)

  • Insert the SD card when the malfunction occurred.

  • Switch the ignition to ACC or ON (engine off or on).

  • Select navigation by operating the center display or the commander switch.

  • Set to an optional destination and operate the navigation function.

  • Is navigation guidance audio output according to the operation?

Yes

Troubleshooting completed. (Explain the contents of the servicing to the customer.)

No

Verify the malfunction symptom in the symptom troubleshooting chart and perform the other applicable malfunction diagnosis.

(See SYMPTOM TROUBLESHOOTING [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]].)

< Previous   Next >
 

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5

COPYRIGHT NOTICE:
This fan site is not affiliated with Mazda, and is intended for personal, or commercial use only. The content of our web pages is for general information purposes only and is presented “as is”. We give no assurance or warranty regarding the accuracy of the contents. Readers should do their due diligence and seek the advice of an appropriately certified automotive technician before attempting any steps on this site. Original content provided by Mazda North America. The content of the manual is copyright under DMCA to: full.metal.resistor@gmail.com
LIMITATION OF LIABILITY:
We accept no responsibility for errors, inaccuracies, or omissions found on these pages. Additionally, we hereby exclude liability for any demands, claims, damages or losses of any kind with regard to any content or information provided on our web-site, including but not limited to incidental or consequential damages, direct or indirect loss, compensatory damages, loss of profits, or otherwise. By using this manual you assume full liablity for any procedures carried out on your vehicle, and are responsible for the vehicle remaining road legal and safe.
Site design © MX5 Docs 2019
Privacy policy
Cookies
X
We use cookies to improve your experience on
our site. By using our site you consent to cookies.
Learn more
I Agree