MX5 mk4 Manual
Home bodyshop manual wiring diagram workshop manual service highlights transmission overhaul

Knowledge Base

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5
Home

 

< Previous   Next >

A MALFUNCTION IN THE SYSTEM EVEN THOUGH THE INDICATOR LIGHT AND WARNING LIGHT ARE NOT ILLUMINATED [DYNAMIC STABILITY CONTROL (DSC)]

4

A malfunction in the system even though the ABS warning light, brake system warning light, TCS/DSC indicator light and DSC OFF indicator light are not illuminated

POSSIBLE CAUSE

  • Mechanical malfunction in system.

Diagnostic procedure

STEP

INSPECTION

ACTION

1

CONFIRM DSC HU/CM DTC
  • Retrieve the DSC HU/CM DTC using the M-MDS.

    (See DTC INSPECTION [DSC HU/CM].)

  • Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See DTC INSPECTION [DSC HU/CM].)

No

Go to the next step.

2

VERIFY SOLENOID VALVE AND PUMP MOTOR OPERATION
  • Switch the ignition off.

  • Connect the M-MDS to the DLC-2.

  • Switch the ignition ON (engine off).

  • Access the active command mode for the solenoid valve and pump motor using the M-MDS.

    (See DTC INSPECTION [DSC HU/CM].)

  • Do the solenoid valve and pump motor operate?

Yes

Inspect the conventional brake system.

If there is a malfunction:

  • Repair or replace any malfunctioning parts according to the inspection result.

No

Repair or replace any malfunctioning parts according to the inspection result.

< Previous   Next >
 

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5

COPYRIGHT NOTICE:
This fan site is not affiliated with Mazda, and is intended for personal, or commercial use only. The content of our web pages is for general information purposes only and is presented “as is”. We give no assurance or warranty regarding the accuracy of the contents. Readers should do their due diligence and seek the advice of an appropriately certified automotive technician before attempting any steps on this site. Original content provided by Mazda North America. The content of the manual is copyright under DMCA to: full.metal.resistor@gmail.com
LIMITATION OF LIABILITY:
We accept no responsibility for errors, inaccuracies, or omissions found on these pages. Additionally, we hereby exclude liability for any demands, claims, damages or losses of any kind with regard to any content or information provided on our web-site, including but not limited to incidental or consequential damages, direct or indirect loss, compensatory damages, loss of profits, or otherwise. By using this manual you assume full liablity for any procedures carried out on your vehicle, and are responsible for the vehicle remaining road legal and safe.
Site design © MX5 Docs 2019
Privacy policy
Cookies
X
We use cookies to improve your experience on
our site. By using our site you consent to cookies.
Learn more
I Agree