DTC

C200D:1C

Resolver sensor

C200D:64

DETECTION CONDITION

• Resolver sensor malfunction is detected

FAIL-SAFE FUNCTION

• Refer to “Fail-safe function table”. (See DTC TABLE [EPS CONTROL MODULE].)

POSSIBLE CAUSE

• Resolver sensor malfunction

SYSTEM WIRING DIAGRAM

—

Step

Inspection

Action

1

• Using the M-MDS, clear the DTC from the EPS control module.

  (See CLEARING DTC [EPS CONTROL MODULE].)

• Using the M-MDS, perform the EPS control module DTC inspection.

  (See DTC INSPECTION [EPS CONTROL MODULE].)

• Is the same DTC present?

Yes

Repeat the inspection from Step1.

If the malfunction recurs, replace the EPS control module, then go to the next step.

(See ELECTRIC POWER STEERING (EPS) CONTROL MODULE REMOVAL/INSTALLATION.)

No

Go to the next step.

2

• Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [EPS CONTROL MODULE].)

No

DTC troubleshooting completed.