MX5 mk4 Manual
Home bodyshop manual wiring diagram workshop manual service highlights transmission overhaul

Knowledge Base

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5
Home

 

< Previous   Next >

DTC U2300:51 [INSTRUMENT CLUSTER]

Description

Instrument cluster configuration error

Detection condition

  • Instrument cluster configuration error (no configuration) detected.

Fail-safe

Not applicable

Possible cause

  • Instrument cluster configuration error

  • Instrument cluster malfunction

System wiring diagram

Not applicable

Diagnostic Procedure

Step

Inspection

Action

1

PERFORM INSTRUMENT CLUSTER CONFIGURATION (USING AS-BUILT DATA)
  • Using the M-MDS, perform the instrument cluster configuration (using As-Built data).

    (See INSTRUMENT CLUSTER CONFIGURATION (USING AS-BUILT DATA).)

  • Clear the DTC for the instrument cluster using the M-MDS.

    (See CLEARING DTC [INSTRUMENT CLUSTER].)

  • Retrieve the instrument cluster DTCs using the M-MDS.

    (See DTC INSPECTION [INSTRUMENT CLUSTER].)

  • Is the same DTC displayed?

Yes

Using the M-MDS, perform the instrument cluster configuration (using As-Built data) again, then go to the next step.

(See INSTRUMENT CLUSTER CONFIGURATION (USING AS-BUILT DATA).)

No

Go to Step 3.

2

VERIFY THAT REPAIRS HAVE BEEN COMPLETED
  • Clear the DTC for the instrument cluster using the M-MDS.

    (See CLEARING DTC [INSTRUMENT CLUSTER].)

  • Retrieve the instrument cluster DTCs using the M-MDS.

    (See DTC INSPECTION [INSTRUMENT CLUSTER].)

  • Is the same DTC displayed?

Yes

Replace the instrument cluster, then go to the next step.

(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

No

Go to the next step.

3

VERIFY IF OTHER DTCs DISPLAYED
  • Are any other DTCs displayed?

Yes

Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.

(See DTC TABLE [INSTRUMENT CLUSTER].)

No

DTC troubleshooting completed.

< Previous   Next >
 

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5

COPYRIGHT NOTICE:
This fan site is not affiliated with Mazda, and is intended for personal, or commercial use only. The content of our web pages is for general information purposes only and is presented “as is”. We give no assurance or warranty regarding the accuracy of the contents. Readers should do their due diligence and seek the advice of an appropriately certified automotive technician before attempting any steps on this site. Original content provided by Mazda North America. The content of the manual is copyright under DMCA to: full.metal.resistor@gmail.com
LIMITATION OF LIABILITY:
We accept no responsibility for errors, inaccuracies, or omissions found on these pages. Additionally, we hereby exclude liability for any demands, claims, damages or losses of any kind with regard to any content or information provided on our web-site, including but not limited to incidental or consequential damages, direct or indirect loss, compensatory damages, loss of profits, or otherwise. By using this manual you assume full liablity for any procedures carried out on your vehicle, and are responsible for the vehicle remaining road legal and safe.
Site design © MX5 Docs 2019
Privacy policy
Cookies
X
We use cookies to improve your experience on
our site. By using our site you consent to cookies.
Learn more
I Agree