Knowledge Base

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5
Home

 

< Previous   Next >

BLIND SPOT MONITORING (BSM) OFF INDICATOR LIGHT DOES NOT TURN ON [BLIND SPOT MONITORING (BSM) SYSTEM]

NOTE:

Description

  • The blind spot monitoring (BSM) OFF indicator light does not turn on while under the illumination conditions.

Possible malfunction

  • The blind spot monitoring (BSM) control module (LH) cannot verify the blind spot monitoring (BSM) switch ON/OFF.

    • Blind spot monitoring (BSM) switch-related malfunction

    • Blind spot monitoring (BSM) control module (LH) malfunction

  • The instrument cluster cannot turn on the blind spot monitoring (BSM) OFF indicator light.

    • Instrument cluster malfunction (illumination circuit malfunction)

Diagnostic Procedure

Step

Inspection

Action

1
    DETERMINE IF CAUSE OF MALFUNCTION IS BLIND SPOT MONITORING (BSM) SWITCH OR BLIND SPOT MONITORING (BSM) INDICATOR LIGHT

  • Display the blind spot monitoring system (BSM) PID MAIN_SW item using the M-MDS.

    (See PID/DATA MONITOR INSPECTION [BLIND SPOT MONITORING (BSM) CONTROL MODULE].)

  • Switch the blind spot monitoring (BSM) switch ON/OFF.

  • Does the PID MAIN_SW monitoring value turn on and off according to the blind spot monitoring (BSM) switch ON/OFF operation?

Yes

Go to Step 3.

No

Go to the next step.

2

Yes

Go to the next step.

No

Replace the blind spot monitoring (BSM) switch.

(See BLIND SPOT MONITORING (BSM) SWITCH REMOVAL/INSTALLATION.)

3
    DETERMINE IF MALFUNCTION CAUSE IS INSTRUMENT CLUSTER OR BLIND SPOT MONITORING (BSM) CONTROL MODULE (LH)

  • Turn off all the indicator lights and warning lights in the instrument cluster using the simulation function WL+IL of the M-MDS instrument cluster.

    (See ACTIVE COMMAND MODES INSPECTION [INSTRUMENT CLUSTER].)

  • Did the blind spot monitoring (BSM) OFF indicator light turn off?

Yes

Replace the blind spot monitoring (BSM) control module (LH).

(See BLIND SPOT MONITORING (BSM) CONTROL MODULE REMOVAL/INSTALLATION.)

No

Replace the instrument cluster.

(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
< Previous   Next >
 

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5

COPYRIGHT NOTICE:
This fan site is not affiliated with Mazda, and is intended for personal, or commercial use only. The content of our web pages is for general information purposes only and is presented “as is”. We give no assurance or warranty regarding the accuracy of the contents. Readers should do their due diligence and seek the advice of an appropriately certified automotive technician before attempting any steps on this site. Original content provided by Mazda North America. The content of the manual is copyright under DMCA to: full.metal.resistor@gmail.com
LIMITATION OF LIABILITY:
We accept no responsibility for errors, inaccuracies, or omissions found on these pages. Additionally, we hereby exclude liability for any demands, claims, damages or losses of any kind with regard to any content or information provided on our web-site, including but not limited to incidental or consequential damages, direct or indirect loss, compensatory damages, loss of profits, or otherwise. By using this manual you assume full liablity for any procedures carried out on your vehicle, and are responsible for the vehicle remaining road legal and safe.