Knowledge Base

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5
Home

 

< Previous   Next >

REAR BUMPER INSTALLATION

1. Connect the connectors.

2. Install the wiring harness clip.
3. Press the rear bumper in the direction of the arrow shown in the figure and install the rear bumper to the rear bumper bracket and the body.

4. Move the rear bumper guide in the direction of the arrow shown in the figure and insert it into the rear bumper slider guide hole.

5. Hook the rear bumper to rear bumper slider in the order show in the figure.

6. Install the screws.

7. Install the screws.

8. Install the following parts:
a. Rear bumper retainer No.1 (See REAR BUMPER RETAINER No.1 REMOVAL/INSTALLATION.)
b. Rear bumper stay (See REAR BUMPER STAY REMOVAL/INSTALLATION.)
c. Rear splash shield (See REAR SPLASH SHIELD REMOVAL/INSTALLATION.)
d. Rear combination light (See REAR COMBINATION LIGHT REMOVAL/INSTALLATION.)
e. Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
f. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
9. Connect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
10. If the rear bumper is replaced, perform the blind spot monitoring radar aiming. (with blind spot monitoring system)(See BLIND SPOT MONITORING (BSM) RADAR AIMING.)
< Previous   Next >
 

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5

COPYRIGHT NOTICE:
This fan site is not affiliated with Mazda, and is intended for personal, or commercial use only. The content of our web pages is for general information purposes only and is presented “as is”. We give no assurance or warranty regarding the accuracy of the contents. Readers should do their due diligence and seek the advice of an appropriately certified automotive technician before attempting any steps on this site. Original content provided by Mazda North America. The content of the manual is copyright under DMCA to: full.metal.resistor@gmail.com
LIMITATION OF LIABILITY:
We accept no responsibility for errors, inaccuracies, or omissions found on these pages. Additionally, we hereby exclude liability for any demands, claims, damages or losses of any kind with regard to any content or information provided on our web-site, including but not limited to incidental or consequential damages, direct or indirect loss, compensatory damages, loss of profits, or otherwise. By using this manual you assume full liablity for any procedures carried out on your vehicle, and are responsible for the vehicle remaining road legal and safe.