MX5 mk4 Manual
Home bodyshop manual wiring diagram workshop manual service highlights transmission overhaul

Knowledge Base

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5
Home

 

< Previous   Next >

DTC U0423:68 [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER)]

System malfunction location

  • Invalid data received from instrument cluster

Detection condition

  • The climate control unit receives error signals from the Instrument cluster for 5s or more

Fail-safe function

Not applicable

Possible cause

  • Instrument cluster malfunction

  • Climate control unit malfunction

System wiring diagram

Not applicable

Diagnostic Procedure

Step

Inspection

Action

1

PERFORM INSTRUMENT CLUSTER DTC INSPECTION
  • Perform the instrument cluster DTC inspection using the M-MDS.

    (See DTC INSPECTION [INSTRUMENT CLUSTER].)

  • Are any DTCs present?

Yes

Go to the applicable DTC inspection.

(See DTC TABLE [INSTRUMENT CLUSTER].)

No

Go to the next step.

2

PERFORM CLIMATE CONTROL UNIT DTC INSPECTION
  • Clear the DTC from the climate control unit memory using the M-MDS.

    (See CLEARING DTC [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER)].)

  • Perform the climate control unit DTC inspection using the M-MDS.

    (See DTC DISPLAY [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER)].)

  • Is the same DTC present?

Yes

Replace the instrument cluster, then go to the next step.

(See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

No

Go to the next step.

3

VERIFY TROUBLESHOOTING COMPLETED
  • Clear the DTC from the climate control unit memory using the M-MDS.

    (See CLEARING DTC [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER)].)

  • Perform the climate control unit DTC inspection using the M-MDS.

    (See DTC DISPLAY [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER)].)

  • Is the same DTC present?

Yes

Repeat the inspection from Step 1.

  • If the malfunction does not recur, go to the next step.

  • If the malfunction recurs, replace the climate control unit.

    (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER].)

Go to the next step.

No

Go to the next step.

4

VERIFY THAT NO OTHER DTCs ARE PRESENT
  • Verify other DTCs displayed.

    (See DTC DISPLAY [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER)].)

  • Are any other DTCs output?

Yes

Perform the corresponding DTC inspection.

(See DTC TABLE [CLIMATE CONTROL UNIT (FULL-AUTO AIR CONDITIONER)].)

No

DTC troubleshooting completed.

< Previous   Next >
 

Free to use workshop manual for your 2015+ Mk4 'ND' Mazda MX-5

COPYRIGHT NOTICE:
This fan site is not affiliated with Mazda, and is intended for personal, or commercial use only. The content of our web pages is for general information purposes only and is presented “as is”. We give no assurance or warranty regarding the accuracy of the contents. Readers should do their due diligence and seek the advice of an appropriately certified automotive technician before attempting any steps on this site. Original content provided by Mazda North America. The content of the manual is copyright under DMCA to: full.metal.resistor@gmail.com
LIMITATION OF LIABILITY:
We accept no responsibility for errors, inaccuracies, or omissions found on these pages. Additionally, we hereby exclude liability for any demands, claims, damages or losses of any kind with regard to any content or information provided on our web-site, including but not limited to incidental or consequential damages, direct or indirect loss, compensatory damages, loss of profits, or otherwise. By using this manual you assume full liablity for any procedures carried out on your vehicle, and are responsible for the vehicle remaining road legal and safe.
Site design © MX5 Docs 2019
Privacy policy
Cookies
X
We use cookies to improve your experience on
our site. By using our site you consent to cookies.
Learn more
I Agree